# Makefile generated by imake - do not edit!
# $Xorg: imake.c,v 1.6 2001/02/09 02:03:15 xorgcvs Exp $

#-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
# This Makefile was generated automatically from Imakefile, using imake,
# which is provided as part of the X Windows distribution. imake was
# written by Todd Brunhoff and Jim Fulton from the Mit X Consortium.
#
# The rules for turning an Imakefile into a Makefile are located in
# conf/Imake.tmpl and conf/Imake.rules. Platform specific parameters
# are set in the .cf files. Site specific parameters are set in the
# system's CONFIG file. Rules and templates for RCCL/RCI created by
# John Lloyd, McGill University, November 27, 1990.
#-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

      TARGET_DEFS = -D"LINUX_CFG"
              RCC = rcc

               CC = gcc
               LD = ld
             LDIR = ../lib
             BDIR = ../bin

             FCMD = undefined

            RMCMD = /bin/rm -f
        JUNKFILES = *.BAK .*.BAK *~ *.CKP .*.CKP \\\#* *.o *.to *.tO core makelog

C_INCS :=
C_DEFS :=  $(TARGET_DEFS)
C_OPNS :=

C_DEFS := $(C_DEFS) -D"RWU"

       RCC_CFLAGS = $(C_OPNS) $(C_INCS) $(C_DEFS) $(TRACE)

            LUSER = $(LDIR)/rciUser.a
            LCTRL = $(LDIR)/rciCtrl.a
            LPUMA = $(LDIR)/libPuma.a

            LAUXK =

            LLIBC = $(LDIR)/libC.a
           LCTREE = $(LDIR)/libCtree.a
 VOLATILE_RCILIBS = $(LUSER) $(LCTRL)
      ALL_RCILIBS = $(LUSER) $(LCTREE) $(LCTRL) $(LAUXK) $(LLIBC)

.SUFFIXES:	.to .tO

.c.to:
	@if [ -f $*.o ] ; then \
	tmp=\#obj_tmp$$$$; mv $*.o $$tmp; fi; \
	echo $(CC) $(CFLAGS) -c -DTEST $^ '[' -o $*.to ']' ; $(CC) $(CFLAGS) -c -DTEST $^; mv $*.o $*.to; \
	if [ "$$tmp" != "" ] ; then mv $$tmp $*.o; else exit 0; fi
.c.tO:
	@if [ -f $*.o ] ; then \
	tmp=\#obj_tmp$$$$; mv $*.o $$tmp; fi; \
	echo $(RCC) $(CFLAGS) -c -DTEST CTRL $^ '[' -o $*.tO ']' ; $(RCC) $(CFLAGS) -c -DTEST CTRL $^; mv $*.o $*.tO; \
	if [ "$$tmp" != "" ] ; then mv $$tmp $*.o; else exit 0; fi

ULIST :=
CLIST :=
PLIST :=
UOBJS :=
COBJS :=
POBJS :=
UTARGS :=
VXWLO :=
VXWBO :=

define CheckForVXWDir
	if [ ! -d VXW ] ; then
	   if [ -f VXW ] ; then
	      echo error: VXW exits, but is not a directory; exit 1
	   fi
	   echo mkdir VXW
	   mkdir VXW
	fi
endef

#=-=-=-=-=-=-=-=-=-=-=-=- Imakefile starts here -=-=-=-=-=-=-=-=-=-=-=-=-=

# -----------------------------------------------------------------------------
#
# make libs    - build library routines and install them in the appropriate
#		 modules in ../lib
#
# make <fxn>-test   - build interactive program to test the table driven
#		      routine FXN()
# make <fnx>-inline - build interactive program to test the inline version
#		      of the routine FXN()
#
# -----------------------------------------------------------------------------

CFLAGS = $(RCC_CFLAGS)
INLINE = inlinemath.sed contants.sed
LIBS = ../lib/libCtree.a ../lib/libC.a

CLIST := $(CLIST) $(LCTRL)(mt_sin.o)
COBJS := $(COBJS) mt_sin.o

CLIST := $(CLIST) $(LCTRL)(mt_atan2.o)
COBJS := $(COBJS) mt_atan2.o

CLIST := $(CLIST) $(LCTRL)(sin.o)
COBJS := $(COBJS) sin.o

CLIST := $(CLIST) $(LCTRL)(atan2.o)
COBJS := $(COBJS) atan2.o

CLIST := $(CLIST) $(LCTRL)(sqrt.o)
COBJS := $(COBJS) sqrt.o

.PHONY: libs
libs:	$(CLIST) $(LCTRL)(__.SYMDEF)
$(LCTRL)(__.SYMDEF): $(COBJS)
	ranlib $(LCTRL)

sin.o:  sin.c
	$(CC) $(CFLAGS) -c $<

atan2.o:  atan2.c
	$(CC) $(CFLAGS) -c $<

sqrt.o:  sqrt.c
	$(CC) $(CFLAGS) -c $<

mt_sin.o:  mt_sin.c
	$(CC) $(CFLAGS) -c $<

mt_atan2.o:  mt_atan2.c
	$(CC) $(CFLAGS) -c $<

maketable:  maketable.o
	$(CC) $(CFLAGS) -o $@ maketable.o -lm $(LLIBC) $(CLIBS)

mt_sin.c: 	SIN.conf maketable
		./maketable < SIN.conf

mt_atan2.c: 	ATAN2.conf maketable
		./maketable < ATAN2.conf

SIN_Cdefs.h SIN_Adefs.h SIN_Adefs.sed: SIN.conf maketable
		./maketable -h < SIN.conf

ATAN2_Cdefs.h ATAN2_Adefs.h ATAN2_Adefs.sed: ATAN2.conf maketable
		./maketable -h < ATAN2.conf

sin-test:  sin-test.o sin.o mt_sin.o
	$(CC) $(CFLAGS) -o $@ sin-test.o sin.o mt_sin.o -lm $(LIBS) $(CLIBS)

atan2-test:  atan2-test.o atan2.o mt_atan2.o
	$(CC) $(CFLAGS) -o $@ atan2-test.o atan2.o mt_atan2.o -lm $(LIBS) $(CLIBS)

sqrt-test:  sqrt-test.o sqrt.o
	$(CC) $(CFLAGS) -o $@ sqrt-test.o sqrt.o -lm $(LIBS) $(CLIBS)

clean::
	$(RMCMD) $(JUNKFILES) *.o *.to *.tO
	$(RMCMD) *test *inline maketable

depend::
	/bin/ls *.c | sed -e 's/.c$$/.s/' | xargs rm -f
	@if [ -f DependFile ] ; then \
	echo mv DependFile DependFile.BAK; \
	mv DependFile DependFile.BAK; else exit 0; fi
	$(CC) -MM -I$$RCCL/h $(C_INCS) $(C_DEFS)  *.c \
	> DependFile

DependFile:
include DependFile

vpath %.h ..
vpath %.c ..
vpath %.s ..
vxw:		$(LDIR)/vxw.o
$(LDIR)/vxw.o:
	(cd $(LDIR); $(MAKE) $(MFLAGS) vxw)

#=-=-=-=-=-=-=-=-=-=-=-=-= Imakefile ends here =-=-=-=-=-=-=-=-=-=-=-=-=-=

depend::

clean::

# XXX line used by make depend - DO NOT DELETE XXX

